Change Language: DeutschDanskEnglish (UK)English (US)EspañolFrançaiseDutchTürkçe

Hyperamp HA1510 REV MK II

$1,995.00

Manufacturer: Seydel

Condition: New

Product Information

 

Hype up your sound! The new Hyperamp HA1510 REV MK II - pre-order now for the old price - available from November 1st, 2014

 

The Hyperamp HA1510 REV MK II combines today's technology with vintage design in an amplifier that surpasses the rest.

The Hyperamp sounds warm and punchy at the same time - it is a handwired Harmonica Tube Amplifier with built-in vintage (tube) reverb - made in Germany.

The Mark II (second version) was designed based on real feedback from Hyperamp MKI users (the detailed operation manual can be found in the Tips-section):

 

1) The Gain + Volume controles now allow you to produce the beloved warm and beefy Chicago sound at lower volumes – low or high-impedance microphones can be used with adjustment capability that allows you to control the "crunch".

2) The new AUX-IN input on the front panel can be connected to any mp3-player or other audio source. You can play along with your favorite tracks without the need for additional equipment (cable not provided).

3) A built-in stand/pedestal at the bottom-front can be used to tilt the amp: Tilting the amp helps the player hear his or her sound better and improves overall sound projection.

4) The built-in spring reverb is tube-driven as well resulting in an authentic vintage style reverb for the authentic Chicago Blues sound.

5) Line-Out or additional external speaker? Both are possible – the new Hyperamp MK II can be used on any stage no matter how small or large it is.

6) Combined INPUT: Guitar jack or XLR: All kinds of mirophones (high- or low-impedance) can be connected to the Hyperamp!

 

Many amps originally are built for electric guitar or bass - but the Hyperamp is is designed from the ground up specifically for the needs of the harps player! That is why the special harmonica sound is created, that once helped the too faint sounding harmonica to become "the mother of the band" (Otis Spann, piano player of the Muddy Waters Band).

This impressive sound thrills players as well as the audience this very day and many players are looking for their sound.  It follows all nuances which are produced by the player's harp and microphone and therefore is the ideal elongation of the "sound chain".

The Hyperamp HA1510 REV MK II is a hand-wired classA-amplifier and produces15 (Tube-) watts. It is equipped with a specialyl designed 10'' Jensen "Alnico" speaker. An external speaker can be plugged in offering adaptability to play in jam sessions, or on small, medium, and large stages.

With its combined input (high-ohmic: 6.3mm socket or low ohmic: XLR) nearly any microphone can be used - the three-band tone control effectivily optimizes the sound. Due to its adaptability to all types of microphones, the AUX-input, and the built-in tube-driven spring reverb the Hyperamp HA 1510 REV MK II is an universal geniusnatural choice for the harmonica player.

 

HYPE UP YOUR SOUND!

 

 

Technical data - Hyperamp HA 1510 REV MK II

Output: 15VA an 4 / 8 Ohm (switchable) *

Speaker: 10'' Jensen P10R 8 Ohm -SPECIAL DESIGN-Alnico

Power amplifier: Class A (2 x EL84)

Level indicator: EM84 (magic eye), at the front

Input (combined): Guitar socket 6,3 mm (mono), -10 dBu at 1 MOhm or XLR-socket, -30 dBu at 200 Ohm

Effects: parallel, with Level-(Reverb-) control **

DI-output: XLR with transformer (magnetically shielded)

Sound control: three-band

Controls at the front: INPUT (combined), BASS, MIDDLE, TREBLE, VOLUME, AUX-IN (cable not provided), EFFECT/REVERB**, Standby-switch, operation light, line-switch

Controls at the back: Electric supply with fuse and spare fuse (110V/60Hz or 2201V/50Hz AC), sockets EFF RET and EFF SEND, XLR-socket DI OUT, socket for ext. speaker EXTERN, socket for int. speaker INTERN, Impedance switch 4 / 8 Ohm

Tube assembly: 1 x EZ81, 2 x EL84, 2 x ECC81, 2 x ECC83, 1 x EM84

Spring reverb: Accutronics, 3 springs

Dimensions (in mm): 484 x 480 x 260 mm - 19 x 18.9 x 10.2 inch

Weight: 14,5 kg - 32 lbs

 

* Through a second speaker jack an external 8 Ohm speaker can be connected, the impedance switch then has to be turned to 4 Ohm. In normal action without an aditional speaker it is set to 8 Ohm.

** Applying the parallel effects loop the direct signal in the amp is mixed up with the effect's signal. The disadvantage is that some effects are limited (e.g. distortion). The advantage is that the direct signal is directed to the power amplifier and therefore remains unaltered. If an external effect-pedal is connected to the EFFECT RETURN jack, the internal spring reverb is switched off.

 

 

Product Code: 905105

Customer Reviews

This product hasn't been reviewed yet. Write a review

 

 

 

====================================

 

================================================================================

--------------------------------------------------------------------------

-------------------------------------------------------------------------------------------------------

 

==========================================================================

 

 

 

hit counter
©2024 goldharps.com - All rights reserved

 

Images, and text on our website cannot be used without prior permission from RW Harmonicas

 

 

 

 

 

 

 

eCommerce by RW Web Designs